LEADSIGN Tailgaters Replacement for Chevrolet Silverado 1500 (2007-2013) 2500 3500 Heavy Duty (2007-2014) GMC Sierra 1500 (2007-2013) 2500 3500 Heavy Duty (2007-2014)Tailgate Backup Reverse Handle with Camera
LEADSIGN Chevrolet Silverado GMC Sierra Rear View Camera is created for those drivers who expect more than just a park assist functionality from an aftermarket backup camera. It is designed to make your car flexible and compatible with a host of technological upgrades. Because the factory pre-set features are not the limit.
This rearview camera doesn’t use the native camera mode of your car. Instead, its display overrides the aftermarket screen when the car is put in reverse. The reverse camera image takes up the full screen, giving a bigger and clearer picture of what’s behind you.
This retrofit is ideal for drivers looking for a flexible park assist solution that leaves room for customizing and expanding your vehicle’s features. This backup camera kit can work with a Multimedia Interface — a LEADSIGN CarPlay module that makes it easy to add a front view camera and/or one of our mirroring devices (SmartView HD Flex, SmartView Apple TV3 or SmartView Apple TV4). Identify your car to find out which add-ons are compatible with your specific car.
Image Sensor: 1/3" PC1058 CMOS
Video Output: NTSC/PAL
Resolution: 960(H) x 576(V)
View Angle: 170° [130(H)x95(V)x170(D)]
Min Illumination: 0.05 Lux
Power Voltage: DC 12V
- * Overrides the
screen with a full-screen camera image
- * Activates automatically when the car goes into reverse just like an original backup camera
- * Characterized by an easy DIY installation process
- This Tailgate Handle Reverse Camera fits for Chevrolet Silverado GMC Sierra
- High Resolution: 960(H)x576(V),700 TV Line (High definition monitor is recommended for a better image &smartview hd ), IP69K Waterproof Camera
- Safer for Parking: 1/3 inch CMOS, Wide View Angle 130(H)x95(V)x170(D),0.05Lux light sensitivity, better night vision for parking
- It comes with universal RCA connectors for compatibility, easy to replace other backup cameras (such as license plate camera) without re-routing the extension cable. Total 32.8 feet cable length to cover long bed.
1 x Tailgate Handle with builtin Car Backup Camera
1 x 32.8 Long Extension Cable
1 x AV adapter cable
1 x Power cable
1 x Instruction Manual
This backup camera can be connected to any aftermarket monitor with a Yellow RCA input. Typically the factory emblem is attached to your truck with double-sided tape. Use a heat gun, at a low heat setting, and use a piece of floss between the emblem and tailgate to remove the old emblem. On some older models, you may need to drill a small hole in your tailgate to run the wiring through. Most 2006+ models come with the holes already drilled.
Why LEADSIGN Tailgate Backup Camera is Different?
LEADSIGN uses Integrated Module - Tailgate handle replacement with a built-in backup camera, no juncture, 100% waterproof
Others use Assembled Module - Tailgate handles replacement + backup camera, has the juncture, not dense and easy to be water seepage.
- The backup camera system comes in a durable and water-resistant housing, in addition to marine grade IP69K waterproof
- Perfect for outdoor use
Professional Aviation Cable
Total 32.8 feet cable length with a single heavy duty sealed connector to cover long bed
High temperature resistance,with waterproof adapter
High Resolution&Wide View Angle
Built-in 1/3 inch CMOS PC1058 image sensor. 960*576 pixels, delivers great sharp and clear image in day and night.
Super Wide View Angle: Wide View Angle 130(H)x95(V)x170(D).It helps you to decrease blind zone accidents very well.
Features an accurate distance guideline display for proper parking and reversing without relying on side mirrors alone.
Compatible with: Chevrolet Silverado/ GMC Sierra 2007-2013
NOTE: 1).MONITOR OR NAVIGATION UNIT NOT INCLUDED,RECOMMEND LEADSIGN Car Stereo Media Receiver.DON'T RECOMMEND to use with the monitor that comes with the original truck